2014 Ram w/Factory Alpine System

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138474
Printed Date: May 11, 2025 at 9:31 PM

Topic: 2014 Ram w/Factory Alpine System

Posted By: one2enjoy
Subject: 2014 Ram w/Factory Alpine System
Date Posted: February 12, 2015 at 9:00 AM

Have a 2014 Ram 2500 w/ factory Alpine system. Wanting to add LOC for an aftermarket amlifier, looking for the wire specs on the factory amp. Also would it be better to tap LOC on the input or output side of the factory sub amp?

-------------
One2enjoy

Replies:

Posted By: auto enhancers
Date Posted: February 12, 2015 at 9:30 AM

before amp is fixed level outputs after the amp you are limited by the amps crossovers and eq, this system will lower the bass output at higher volumes, it would be best to use an RTA to see what signal will be the best for what you are trying to accomplish.

Posted By: sirhutson
Date Posted: February 12, 2015 at 1:21 PM

tag the output of the factory sub if you are adding subwoofer amplifier.

-------------
Hutson-

Print Page | Close Window