Radio kit, 1995 intrepid

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=13856
Printed Date: July 18, 2025 at 8:23 PM

Topic: Radio kit, 1995 intrepid

Posted By: wlg83
Subject: Radio kit, 1995 intrepid
Date Posted: May 22, 2003 at 3:01 PM

I found a radio mounting kit that was specified for my car, but the radio is too deep. Is there an alternative kit that would fit my car. Thanks in advance for any help.

Replies:

Posted By: Sweekster
Date Posted: May 22, 2003 at 3:35 PM

Try this

https://www.metraonline.com/products/product_detail.asp?Product=248

Posted By: bberman1
Date Posted: May 22, 2003 at 4:23 PM

Is the radio physically too deep to fit, or is the kit preventing it from going all the way back?

Posted By: wlg83
Date Posted: May 23, 2003 at 2:06 PM

The radio backs against part of the heater vent and needs to sit further foreward. I know I have seen install kits similar to what I am looking for, something that would mount the front of the radio further than the stock location. All I need is about 1/2 inch or more.

Posted By: bberman1
Date Posted: May 23, 2003 at 3:37 PM

A couple of suggestions - If you have a heat gun you can re shape the heater vent/duct. Another thing you can do is cut a whole in the duct and then cover it in duct tape giving a 1/2 inch indentation, but either way should give you some more flexibility.

Print Page | Close Window