RCA signal split
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139379
Printed Date: April 17, 2024 at 7:30 PM
Topic: RCA signal split
Posted By: pts760
Subject: RCA signal split
Date Posted: September 01, 2015 at 4:53 PM
What is the best way to split a RCA signal with minimal audio loss. I plan on running a mono amp and (2)4 channel amp's so I have to split the full range audio signal. Do I just use spitters or is there something else better
------------- I drink current, eat ohms, and bleed voltage
Replies:
Posted By: i am an idiot
Date Posted: September 01, 2015 at 8:45 PM
Does the 4 channel amplifier have a 2ch/4ch switch somewhere on it? If not, you will have to use Y adapters, or get a radio with Front/Rear and Subwoofer RCA Jacks.
Is it a Sony amplifier that has BTL written by the left RCA jack?
Posted By: pts760
Date Posted: September 03, 2015 at 10:38 PM
No Sony amplifier...(2) massive audio NX4 amps..I'll proly use a audio control 8 channel signal summing device unless there's a better solution..I don't like the idea of splitters because of signal loss
------------- I drink current, eat ohms, and bleed voltage
Posted By: pts760
Date Posted: September 04, 2015 at 6:45 PM
change of plans. im gonna use (2) of the massive D800.4 amps that have a 2ch/4ch switch. It never made sense to me why the 2ch\4ch switch was on the 4 channel amps. Thats pretty embarrasing i didnt know that before but if your not learning new things your still riding on the same wave. Thanks for the direction "i am an idiot"
------------- I drink current, eat ohms, and bleed voltage
|