F350 sub box

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=140451
Printed Date: May 12, 2025 at 12:21 PM

Topic: F350 sub box

Posted By: s&s services
Subject: F350 sub box
Date Posted: December 29, 2015 at 11:44 PM

anyone got any good plans for a sub box for a 2006 f350 crew cab no power slider looking at doing two 10's

Replies:

Posted By: i am an idiot
Date Posted: December 30, 2015 at 3:14 AM

Tricky box to build. You will have to cut a hole in the back of it for the magnet to fit into, then use a piece of 1/4 inch stock to cover that hole. Very little depth, but you can fit a JL10w0v3. Do not build something that will only accept a flat woofer.

I highly recommend at least looking at this.
https://www.foxacoustics.com/searchresults.asp?cat=92

Posted By: rs specialist
Date Posted: December 30, 2015 at 12:12 PM

I would build something for the woofer you are looking to use. Depth is an issue. If you are looking for a strong shallow woofer, look at the Rockford Fosgate Power series slim subs. They are amazing for how shallow they are. https://www.rockfordfosgate.com/products/details/t1s2-10
They even offer loaded enclosure with a port https://www.rockfordfosgate.com/products/details/t1s-1x10p
They are very impressive.

Print Page | Close Window