Print Page | Close Window

Speaker quality level using high level inputs

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=140929
Printed Date: April 28, 2024 at 5:26 PM


Topic: Speaker quality level using high level inputs

Posted By: mattgintx
Subject: Speaker quality level using high level inputs
Date Posted: February 27, 2016 at 4:22 PM


So I'm building a modest stereo for my 2015 f150 xlt. It has the myfordtouch screen and I don't plan on replacing it or adding any dsp.

Basically I'm going to replace the speakers and amp them utilizing high level inputs.

My question is I want to improve the sound but not spend more money that I won't hear. The amp I plan on using is the ppi 900.4.

With utilizing high level inputs would I likely hear a difference in quality from say a set of 6.5" component Polk db 6501 series ~$112 vs Polk mm6501 $210.

Spending an extra 100$ doesn't matter much to me but at the same time considering that I'm not changing out the factory head unit I don't want to just waste money.



Replies:

Posted By: DYohn
Date Posted: February 28, 2016 at 5:23 PM
The biggest impact on sound quality is always the speakers. Use the best you can afford.

-------------
Support the12volt.com


Print Page | Close Window