Print Page | Close Window

MTX amp question

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=14252
Printed Date: August 01, 2025 at 9:56 PM


Topic: MTX amp question

Posted By: NiceGuy818
Subject: MTX amp question
Date Posted: May 31, 2003 at 6:01 PM

I got few questions and I would apperciate if anyone takes there time to answer it.

1. I just got a new amp and it has a EBC port on it whats that for?

2. The amp is mono but it has 2 + and 2 - speaker terminals how come?

Thanks




Replies:

Posted By: bberman1
Date Posted: May 31, 2003 at 8:50 PM

1) The EBC is the electronic bass control. Its looks like a telephone wire with a knob on one end. It allows you to adjust the bass volume from where ever you mount the control (knob).

2) It has 2 speaker connections for convenience. It makes it easier to connect each speaker directly to the amp then having to bridge them together.




Posted By: NiceGuy818
Date Posted: June 01, 2003 at 9:14 AM

Basically the EBC is for controling your gain setting? With EBC can you get more bass out of your amp?




Posted By: NiceGuy818
Date Posted: June 01, 2003 at 9:16 AM

If I only have one sub should I bridge them? since it has 2 speaker connections.




Posted By: Big Purds
Date Posted: June 01, 2003 at 10:56 AM
what sub is it? single voice coil or dual? what amp is it and what is the power handling capability of the sub?

the EBC is basically a remote gain adjustment...sounds fancier to call it an electronic bass control thoughposted_image...


Print Page | Close Window