Can someone check the cubic feet of my box

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142652
Printed Date: May 12, 2025 at 8:03 AM

Topic: Can someone check the cubic feet of my box

Posted By: freddy15sharley
Subject: Can someone check the cubic feet of my box
Date Posted: February 22, 2017 at 11:40 AM

I have two vpro 154d I wanted a ported box but I'm thinking of going sealed My box measurements now w-18 d-29 h1-39 h2-19 Port length 33 port height 17.5 port w 5 all this measurements are in inches thank you

Replies:

Posted By: the12volt
Date Posted: February 22, 2017 at 11:52 AM

You didn't provide the thickness, but you can enter your measurements into the calculators here: https://www.the12volt.com/caraudio/boxcalcs.asp

-------------
posted_image

the12volt • Support the12volt.com

Posted By: freddy15sharley
Date Posted: February 22, 2017 at 3:11 PM

The wood thickness is .75 just want to make sure it was right or should I just do a sealed box

Posted By: seeleyboy
Date Posted: February 26, 2017 at 9:28 AM

It is impossible to give you an answer to this, not knowing how you designed the port tunneling... Did you add 2 sides to create the port? did you use one of the side walls? It is best for you to just use the tools supplied on the site, calculator..etc. as the admin supplied a link to.. I dont want to sound insensitive, nor does anyone else, I presume, but you just wont get many replies to a post such as this. the site is awesome and the members even more so, but there are just some answers you cant get an answer for.. good luck with your design and your system..

-------------
NOISE IS NOT MUSIC!

Posted By: freddy15sharley
Date Posted: February 26, 2017 at 8:46 PM