adding 2 6x9’s
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142770
Printed Date: April 19, 2024 at 4:25 PM
Topic: adding 2 6x9’s
Posted By: filth
Subject: adding 2 6x9’s
Date Posted: March 19, 2017 at 1:51 PM
I have a Clarion head unit 40w X4 speaker leads that are currently not being used because all 4 of my speakers are wired directly to a Polk 4 channel amp. Now can I wire 2 additional speakers to the unused reciever speaker leads without interupting the RCA signal to my amp/speakers?
in other words are the speaker wires on a reciever always gonna recieve a signal even if RCA's are connected?
Thanks
-------------
filth
Replies:
Posted By: sparkie
Date Posted: March 19, 2017 at 6:18 PM
Short and sweet answer. Yes you can add speakers to the speaker outputs of the radio.
-------------
sparky
Posted By: filth
Date Posted: April 09, 2017 at 5:23 PM
Thank u
-------------
filth
Posted By: i am an idiot
Date Posted: April 09, 2017 at 9:49 PM
The so called 40 watts of your radio is actually 17.5 watts. If your amplifier is 2 ohm stable, you would be better off connecting them to the amplifier.
|