Print Page | Close Window

Pioneer SPH-120DA Appradio 4, Steering Wheel Control Programming

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145894
Printed Date: May 03, 2024 at 5:22 AM


Topic: Pioneer SPH-120DA Appradio 4, Steering Wheel Control Programming

Posted By: assocracer
Subject: Pioneer SPH-120DA Appradio 4, Steering Wheel Control Programming
Date Posted: December 31, 2019 at 12:43 AM

I’m trying to install an aftermarket Bluetooth steering wheel control module for my Appradio 4. It’s working but the issue is I can’t find where in the menu the steering wheel control programming is. I can’t find anything on the internet for the Appradio 4, but I can for the 2 and 3. Any help would be awesome. Thanks.



Replies:

Posted By: i am an idiot
Date Posted: December 31, 2019 at 6:44 PM
Pioneer has not changed their protocol since inception. Use the guide for the 2 or the 3.




Posted By: assocracer
Date Posted: December 31, 2019 at 10:15 PM
No where in any of the menus is there a steering wheel control option. In 2 and 3 it was under the system menu. Does it only show up if it senses one plugged in? Somehow the plug is broken on the back so I soldered two wires into the pads on the board cause the controller I got doesn’t use a plug.




Posted By: i am an idiot
Date Posted: January 01, 2020 at 4:07 PM
What vehicle and what kind of steering wheel control module are you using?





Print Page | Close Window