Print Page | Close Window

2019 Ram 1500 Classic SLT, RP4-CH21 Camera Error

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=146004
Printed Date: March 29, 2024 at 2:47 AM


Topic: 2019 Ram 1500 Classic SLT, RP4-CH21 Camera Error

Posted By: juan aponte
Subject: 2019 Ram 1500 Classic SLT, RP4-CH21 Camera Error
Date Posted: February 06, 2020 at 8:58 AM

We have been having issues with the factory camera after installing a new radio. Contacted Pac-Audio several times and they could only say that it should work. We swapped out the interface and had the same issues. Screen stays black when car goes into reverse. With previous harness camera would go in and out and glitch at times. I was thinking The factory camera might not be getting enough voltage but am not sure. Any help works. Thanks in advance!




Replies:

Posted By: mgoetz74
Date Posted: February 06, 2020 at 4:34 PM
factory camera only run off of 6 volts anything higher and you risk burning the camera out

-------------
33 years as a installer now just a retired old guy. Favorite thing to install/topic are remote starts/car alarms. Stop using test lights!!!




Posted By: juan aponte
Date Posted: February 06, 2020 at 4:43 PM
Awesome thanks! So the Pac-audio interface is not converting 12v to 6v for the camera?





Print Page | Close Window