2017 Ram 1500, Alpine, Idatalink Maestro Issue
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=146247
Printed Date: April 26, 2024 at 1:28 AM
Topic: 2017 Ram 1500, Alpine, Idatalink Maestro Issue
Posted By: binburglar
Subject: 2017 Ram 1500, Alpine, Idatalink Maestro Issue
Date Posted: May 30, 2020 at 9:17 PM
I need technical help with your px6 I was hoping you could help. I have a 2017 ram 1500 Laramie with auto A/C with alpine stereo and subwoofer. I replaced all my speakers, and bypassed the factoy amplifier using a specific T-harness, and maestro unit by iDatlink (the link is below) this allows me to connect directly to an aftermarket amplifier and Maestro unit ( kenwood XR600-6DSP) allowing me to keep my factory headunit so I can retain all vehicle systems. This system I installed worked flawlessly and sounded fantastic. After alot of thought I decided to install a tesla style headunit, once connected everything worked except all the audio, the Headunit has rca outputs for external amplifiers but the kenwood amp has no rca inputs. The kenwood amp, t-harness and Maestro unit were all designed to work together to bypass the amp. The amp connects through the T-harness so I can't use the Px6's rca outputs. Would it be possable to used the same headunit but use the wire harness deaigned for the trunk with no amplifer since I bypassed the amp in my original deaign, as of now the store will not allow me to return this, so I am trying to salvage this.
https://maestro.idatalink.com
https://youtu.be/-7GgmEbGiRo
Replies:
Posted By: binburglar
Date Posted: May 30, 2020 at 9:22 PM
The Px6 is a Tesla style 12" android tablet head unit video link below.
https://youtu.be/cj6kcOe7MZc
Posted By: 94_dc4
Date Posted: June 06, 2020 at 2:47 PM
Did you check to verify if the idatalink maestro is compatible with that android unit?
|