Print Page | Close Window

MB Quart NA2-400.2 Amp Clarification

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=146457
Printed Date: March 28, 2024 at 8:43 PM


Topic: MB Quart NA2-400.2 Amp Clarification

Posted By: dertitan2
Subject: MB Quart NA2-400.2 Amp Clarification
Date Posted: September 23, 2020 at 3:08 PM

MB Quart NA2-400.2 Powersport amp stats the following: "This switch will set the amplifier to have a full frequency output or to filter out high or low frequencies. The NA1-400.2 offers either a bandpass or a high pass filter." I am getting myself confused, you can select HP or OFF or LP, the manual states the amp has a 60hz subsonic filter, now where I am confused is this subsonic filter at 60 when it is set to off or other, i ask this because this is going to be feeding a set of polk audio db652 2 way 6.5" speakers on a motorcycle in the faring, Polk audio advised me to set the HP amp to 60, but if the subsonic is at 60 not need to adjust HP

I am probably just over reading what the manual says

Direction and clarification would be appreciated






Print Page | Close Window