Print Page | Close Window

2019 Nissan NV1500 Steering Wheel Control

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=146682
Printed Date: April 23, 2024 at 5:03 AM


Topic: 2019 Nissan NV1500 Steering Wheel Control

Posted By: otmm
Subject: 2019 Nissan NV1500 Steering Wheel Control
Date Posted: January 16, 2021 at 4:10 PM

Can any please provide a solution to get my steering wheel controls to work with my after market radio. I have a 2019 Nissan NV1500. I do not know what is compatible... I have looked up parts (steering wheel modules) but nothing seems to be clear for the 2019 Nissan NV1500.. Any information would be greatly appreciated. Wiring diagrams/ modules/ ect...

Currently I have a KENWOOD DNX576s head unit and I would really like to get my steering wheel controls to work with this unit. My steering wheel has SOURCE/ TRACK SKIP FORWARD, TRACK SKIP BACK / VOL UP, VOL DOWN / PHONE ANSWER, PHONE DISCONNECT



Replies:

Posted By: i am an idiot
Date Posted: January 16, 2021 at 6:32 PM
Metraonline.com does not have much listed for that vehicle, but the do show the AXSWC. maestro.idatalink.com lists their SW




Posted By: otmm
Date Posted: January 23, 2021 at 6:47 AM
So I purchased The Maestro SW but the diagram they came up with for my vehicle still does not match up. They dont even have my steering wheel listed.. I only have buttons on the left side of the SW. I guess i will have to wait and get in touch with there tech support.. What a pain just for a few buttons... They have a guide to troubleshoot wires but the steps are just ridiculous.




Posted By: mgoetz74
Date Posted: January 23, 2021 at 10:19 AM
maestro allows you to do a custom steering wheel. When you are flashing the maestro above the steering wheel picture it say "my steering wheel not shown" it will ask you for the resistance that is shown on the wire when you press one of the buttons, have to do it for each button you want to program. Just have to have a dmm and know how to read resistance on it. Nissan steering wheel controls after 2013 are the worst things in the world to do. They have made them overly complicated no real reason

-------------
33 years as a installer now just a retired old guy. Favorite thing to install/topic are remote starts/car alarms. Stop using test lights!!!





Print Page | Close Window