Print Page | Close Window

Making 2 Kicker CVX 2 Ohm DVC Into 1 Ohm Load for Power Acoustik 4000

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=146802
Printed Date: May 02, 2025 at 3:48 AM


Topic: Making 2 Kicker CVX 2 Ohm DVC Into 1 Ohm Load for Power Acoustik 4000

Posted By: jcolin936
Subject: Making 2 Kicker CVX 2 Ohm DVC Into 1 Ohm Load for Power Acoustik 4000
Date Posted: April 12, 2021 at 8:18 PM

Plz hel


-------------
Jason colindres



Replies:

Posted By: mgoetz74
Date Posted: April 14, 2021 at 11:24 AM
cant with 2 speakers, one 2 ohmn dvc speaker would already show the amp a 1 ohm load. Parallel wiring cut it in half (2 4 ohms woofers is 2 ohms) and series double it (2 4 ohm woofers would be 8)

rt=(r1 x r2) divided by (r1 + r2) when only 2 speakers (or voice coils) are connected in parallel

rt= 1 divided by (1/r1 + 1/r2 + 1/r3...ect when 2 or more are connected in parallel

rt=r1 + r2 + r3...ect for series

-------------
33 years as a installer now just a retired old guy. Favorite thing to install/topic are remote starts/car alarms. Stop using test lights!!!




Print Page | Close Window