2014 9th Gen Chevrolet Impala, No Sound After Hi/Lo Install

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=147190
Printed Date: May 01, 2025 at 6:47 PM

Topic: 2014 9th Gen Chevrolet Impala, No Sound After Hi/Lo Install

Posted By: impala706
Subject: 2014 9th Gen Chevrolet Impala, No Sound After Hi/Lo Install
Date Posted: December 26, 2021 at 7:35 AM

Having the toughest time trying to figure out where did I go wrong... I've been searching for this solution and everyone has a solution but for what I'm dealing with. I recently did a sub/amp add-on and installed a hi/lo converter on the rear speakers at the amp. No after the install, Im not getting sound from the front door speakers. I get sound from the dash and sound from the rear(its low, but there's sound). I've seen the vids where the cut purple/blue wire at the black plug for ANC but i have a BROWN PLUG and I dont have a pur/bl wire. See attached pic... My wire is pur/gry Any help would be appreciated!!! posted_image

Replies:

Posted By: i am an idiot
Date Posted: December 26, 2021 at 9:14 AM

Did you unmount the amplifier. I am pretty sure it gets ground through the chassis of the amplifier.

-------------
Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB

Posted By: impala706
Date Posted: December 26, 2021 at 11:53 AM

This was a random google pic showing the color plug that I have...

Posted By: impala706
Date Posted: December 26, 2021 at 11:55 AM

UPDATE:::::

I've done more reading around and have come to find out that the front door speakers are mid-range only... not a full range speaker.
Any truths to this?
If an upgrade is wanted, can I splice into the dash speakers for full range sound?