Print Page | Close Window

Pairing Arc Amp With Speaker Setup

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=147380
Printed Date: May 01, 2025 at 2:28 PM


Topic: Pairing Arc Amp With Speaker Setup

Posted By: cusecorals
Subject: Pairing Arc Amp With Speaker Setup
Date Posted: June 05, 2022 at 10:29 AM

I have 2 pairs of hertz k170.
I want to add 2 arc a-10 subs at 2ohm or 1 a-10 at 4ohm.

I was looking at the Arc x2 850.5 but would I be able to use the Arc x2 1100.5 without overpowering the mids?
Been out of the audio hobby for a minute but on my way back in.



Replies:

Posted By: lineman26
Date Posted: June 07, 2022 at 6:34 AM
As long as you are running just two channels of the 1100.5 to the Hertz K170 set you will be fine if you set the high pass filter and avoid distortion.

-------------
Car Audio shop manager - installer 1996 - 2005,




Print Page | Close Window