Print Page | Close Window

MTX 6152 question

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=14865
Printed Date: July 12, 2025 at 10:42 AM


Topic: MTX 6152 question

Posted By: iambakerboy
Subject: MTX 6152 question
Date Posted: June 13, 2003 at 12:24 AM

I have a MTX 6152 amp and a pair of T61044A dual voice subs. Right now I have it setup for a 4 ohm load bridged on the amp, The manual that came with the amp indicates that a 2 ohm load can not be done. Has anyone tried this amp with a 2 ohm load bridged?? Any information on this would be great, thanks



Replies:

Posted By: Big Purds
Date Posted: June 13, 2003 at 3:53 AM
dont do it...MTX rates their amp where they will perform...if you do a 2 ohm mono load it will fry...


Print Page | Close Window