Print Page | Close Window

Bazooka amp tube wire diagram

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=15101
Printed Date: July 23, 2025 at 9:07 AM


Topic: Bazooka amp tube wire diagram

Posted By: ant@unigoal
Subject: Bazooka amp tube wire diagram
Date Posted: June 18, 2003 at 10:33 AM

I have a used amplified Bazooka bass tube that has the rca's cut off of them. I'd like to rewire the rca's and use this tube in my girls ride but I need to know what's what? Here is a break down of what I have on this 10 pin plug. wire is not even in the plug so Axe that.

2 blk (look like speaker wires but no stripe)

Orange

green

grey

then white /blue stripe

2 white's (going to same pin

then a 2nd white w/ blue stripe

I'm guessing the 2 whites are a common ground for the RCA's but I'm still not sure what color the remote wire is. I also have a red & blk wire but I know what those are and they aren't on the plug they go directly into the tube.


thanks

ant



Replies:

Posted By: esmith69
Date Posted: June 18, 2003 at 10:08 PM

One of these should be able to help you out:

https://www.bazooka.com/techInfo_wiring.asp



-------------
Ethan
-----
"Patience, persistence, and perspiration make an unbeatable combination for success"
Donate to the12volt.com




Posted By: sparkyssb
Date Posted: June 18, 2003 at 11:32 PM
Looks like you have the A-40 series.

Hookup looks like this:

Both Blacks: High level outputs (+,-)
Orange: Remote turn-on
Green: High level input (left channel)
Gray: High level input (right channel)
Both Whites: Low level inputs (+) [RCA]
Both Whites w/blue strips: Low level inputs (-) [RCA]

Hope this helps!

Take care, Eric





Print Page | Close Window