Print Page | Close Window

power tapping 2003 dodge

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=15820
Printed Date: July 26, 2025 at 8:04 AM


Topic: power tapping 2003 dodge

Posted By: kudruggist
Subject: power tapping 2003 dodge
Date Posted: July 03, 2003 at 8:51 AM

I need to tap into the RED / white wire on the radio harness to power XM radio.  What is the best method?  Thanks

-------------
Greg Russell



Replies:

Posted By: Sweekster
Date Posted: July 03, 2003 at 10:18 AM
You could probably try a wire tap in.  That way you aren't actually having to cut the wire. 



Posted By: esmith69
Date Posted: July 03, 2003 at 11:16 AM

Remove about 1 inch of insulation from the wire you want to tap in to; then take your power wire, twist it around the wire you're tapping in to, and solder.  Finish by wrapping with some electrical tape



-------------
Ethan
-----
"Patience, persistence, and perspiration make an unbeatable combination for success"
Donate to the12volt.com


Print Page | Close Window