Print Page | Close Window

Is it better to tap in before/after amp?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=15951
Printed Date: July 17, 2025 at 11:09 PM


Topic: Is it better to tap in before/after amp?

Posted By: Dry Heat
Subject: Is it better to tap in before/after amp?
Date Posted: July 06, 2003 at 6:08 PM

I have a 2003 Hyundai Santa Fe with a factory Monsoon (single CD) h/u and a Delphi amp under the front passenger seat.  I am adding an amp and some speakers from my prior vehicle.   I have a high level to low level converter before my aftermarket crossover and amp.  Is it better to tap into the wires between the h/u and the amp or into the wires running out of the amp to the speakers? 



Replies:

Posted By: bberman1
Date Posted: July 06, 2003 at 6:26 PM
You will want to tap the wires after the factory amp.



Posted By: Dry Heat
Date Posted: July 06, 2003 at 6:41 PM
Excellent.....thx. much bberman.



Posted By: bberman1
Date Posted: July 06, 2003 at 8:09 PM
not a problemposted_image


Print Page | Close Window