Print Page | Close Window

Jeep Cherokee Speaker Installation

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=16347
Printed Date: September 11, 2025 at 2:48 PM


Topic: Jeep Cherokee Speaker Installation

Posted By: abbeyroad39402
Subject: Jeep Cherokee Speaker Installation
Date Posted: July 15, 2003 at 7:27 PM

I have a 1999 Jeep Cherokee, and the speaker in the left front door panel isn't working.  Is this a common problem? In any event, I want to remove the door panel to get at the speaker, but I am having an impossible time with it.  I have manual windows and door locks.  Any help would be greatly appreciated.  Thank you.

-------------
Chris La Pilusa



Replies:

Posted By: esmith69
Date Posted: July 16, 2003 at 8:47 AM

First thing make sure you remove the window crank handle thingy.  It's held on with a horseshoe-shaped metal clip thing and usually a hook tool works best.

Then just follow these directions, they are from the Scosche Autosound guide thingy:

FRONT DOOR SPEAKER INSTALLATION:

NOTE: THE FACTORY SPEAKER PROVISION IS FOR 51/4" 2-HOLE

SPEAKERS.

1. EXTRACT (1) SCREW FROM THE BACK OF THE DOOR RELEASE TRIM CUP

2. EXTRACT (1) SCREW FROM ARMREST POCKET.

3. EXTRACT (1) BOLT FROM UNDER ARMREST.

4. USE A PANEL REMOVAL TOOL TO RELEASE FASTENERS FROM AROUND

THE PERIMETER OF THE DOOR PANEL.

5. UNPLUG ANY ELECTRICAL CONNECTORS FROM DOOR PANEL, UNHOOK

METAL CONTROL RODS, AND REMOVE PANEL.

6. EXTRACT (2) SCREWS HOLDING SPEAKER IN PLACE, UNPLUG AND

REMOVE.



-------------
Ethan
-----
"Patience, persistence, and perspiration make an unbeatable combination for success"
Donate to the12volt.com


Print Page | Close Window