Print Page | Close Window

03 Trailblazer Install

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=16392
Printed Date: June 16, 2025 at 3:12 PM


Topic: 03 Trailblazer Install

Posted By: CousinCleotis
Subject: 03 Trailblazer Install
Date Posted: July 17, 2003 at 2:54 PM

Hi all,

I am getting ready to do a full install on an '03 Trailblazer.  It has Onstar, a six disc changer but no bose.  We will be keeping the factory head unit, but replacing all the speakers.  We will be adding 2 amps, one for bostwic subs and a four channel for the component set and rear fill.

Here is my question.  Is the PAC AOEM-GM24 the right interface for my project?  Is there any other interface connectors I may need?  Does this trailblazer have an amp already installed and if so where is it located?   Also can I come behind said amp and tie in to the factory wiring for my new set up?

Any help or advice will be greatly appriciated.

Thanks,

Cousin Cleotis



-------------
8D



Replies:

Posted By: CousinCleotis
Date Posted: July 20, 2003 at 11:34 AM

FYI 

03 install came off smooth as silk. Pulled all new speaker wires, and the AOEM-GM24 PAC was right.

Sounds Great!!



-------------
posted_image



Posted By: bberman1
Date Posted: July 20, 2003 at 5:10 PM

Good to hear posted_image


Print Page | Close Window