Print Page | Close Window

4 to 8 AWG adapter

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=16423
Printed Date: June 09, 2025 at 1:31 PM


Topic: 4 to 8 AWG adapter

Posted By: wvsquirrel
Subject: 4 to 8 AWG adapter
Date Posted: July 18, 2003 at 4:48 AM

I've found 1/0 to 4 AWG adapters, but have not had any luck finding 4 to 8 AWG adapters. Anyone know where I can buy some online?

My problem is I want to use 8AWG to wire my HX2's, each in their own chanber. So that leaves me with 2 + and 2 - (that will be apx 4AWG in size when combined) that have to go to my RF 1000bd, which only accepts 1 8AWG input per + and -. I really don't want any more holes then is necessary in my chambers, so is there anything else that I could do or use to keep the 8AWG?

-------------
Squirrel
"No more Cpt. Kirk chit chat"
If its too loud, then you're too old
Donate to the12volt.com



Replies:

Posted By: Big Purds
Date Posted: July 18, 2003 at 5:00 AM
Stinger makes some, I have some in my car right now...I bought them off ebay, so you may want to just look around on ebay and see if you can find them or find a seller that sells alot of stinger products and see if he can get them for you...




Posted By: bberman1
Date Posted: July 18, 2003 at 9:46 AM




Posted By: Big Purds
Date Posted: July 18, 2003 at 1:36 PM
lol sorry, I posted that at about 4 in the morning, and wasnt quite interpreting the question properly...I was speaking of reducers which allow you to use a 4 ga wire where you only have a terminal that accepts an 8 ga allowance...




Posted By: bberman1
Date Posted: July 18, 2003 at 8:42 PM
Sorry you would want (2) of these https://www.darvex.com/miva/merchant.mv?Screen=PROD&Store_Code=D&Product_Code=PBP-51428&Category_Code=APDB they give you 2 outputs instead of four.





Print Page | Close Window