Print Page | Close Window

amplifier wiring

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=16876
Printed Date: August 06, 2025 at 11:37 PM


Topic: amplifier wiring

Posted By: l7sdime
Subject: amplifier wiring
Date Posted: July 30, 2003 at 11:43 AM

ok i have decided instead of goin with 4 l7's and walling my truck off i am going to go to three l7 12's and a kx1200.1 for two and a kx600.1 for the other. i can put more wattage to eahc (about 600) and i can probably get louder with this setup. Im putting 3.25 cu ft of airspace for each one. thats 10.25 cu ft total.  how should i wire the speakers?? the 12001 is stable at 1 ohm and the kx 600.1 is stable at 2 ohms. is this gonna cause a difference in frequencies they play at i.e. the one l7 will play a higher bass or what?? should i get the 4 ohm or 2 ohm dvc subs? any suggestions will help thanks.

        wes




Replies:

Posted By: Special-K
Date Posted: July 30, 2003 at 11:45 AM
Get the 2ohms. You can run 2 ohm or 1 ohm with those. That way later in the furture, u can run 1 ohm to all of them. I don't know about mixing that up though. Let me check with some freinds.


Print Page | Close Window