speaker question again
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=16902
Printed Date: July 31, 2025 at 3:03 PM
Topic: speaker question again
Posted By: msf145
Subject: speaker question again
Date Posted: July 30, 2003 at 9:24 PM
i am putting components in the door panel of a 97 eclipse. im plan on mounting the xover in the car rather than the door. but i still need to manuever the wire to the door. is there an easy way to do this. i cant seem to get through the opening where the other wires go through. its an actaully harness plug where the boot inbetween the door and car is. is my only option to drill? it seems hard to get a drill in there. leave me some feed back of an easy way. if there is an easy way.
Replies:
Posted By: sonicsound
Date Posted: July 30, 2003 at 11:58 PM
Your best bet would be to leave that xover in the paneling of the car that way you don't have t run wires through the grommet of the door. It's a lot easier and a lot quicker to do it that way. Otherwise I don't believe there is an easy way to do it the way you want to do it....Hope that helps....
-------------
Sonic
Pioneer AVH-P4000DVD
Zapco 360.4
Zapco 500.1
Zapco SP-4SL Processor
Two JL 10 W3v3d2
Alumapro 15 Farad Cap
|