transmission line box question

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=17215
Printed Date: July 14, 2025 at 10:59 PM

Topic: transmission line box question

Posted By: MAXST
Subject: transmission line box question
Date Posted: August 05, 2003 at 9:02 PM

In the picture below is my drawing of my design....firstly is that a transmission line box....secondly...does it look perportioned right? im gonna put a jensen nitro series sub in it...hints and tips would be kool....im gonna dado the wave joints and use a router on the sides in such...silcone seal all around.

OK I CANT LOAD ANY PICTURES...Is this part of the server down still?

-------------
I need quality equipment, feel free to donate.

Replies:

Posted By: tdsteele
Date Posted: August 06, 2003 at 7:02 AM

Yep, no pics til the server is fixed.

Posted By: MAXST
Date Posted: August 11, 2003 at 7:05 PM

whos the person here that has this setup... i could send the pics to you and you could check them out.

-------------
I need quality equipment, feel free to donate.

Posted By: tdsteele
Date Posted: August 11, 2003 at 7:31 PM

I have a transmission line enclosure for a pair of Diamond 10's. I had emailed Diamond asking them about it and they sent me the prints for the enclosure i have. Now i dont know how it would react with other brands of subs but it does extremely well with the ones i have. My email is tdsteele@bellsouth.net if you want to send me a pic.

Posted By: MAXST
Date Posted: August 11, 2003 at 7:39 PM

k..i made up two on paint...

-------------
I need quality equipment, feel free to donate.

Print Page | Close Window