Print Page | Close Window

Wiring dia gram harness layout

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=1766
Printed Date: September 14, 2025 at 11:44 PM


Topic: Wiring dia gram harness layout

Posted By: wolfpreist
Subject: Wiring dia gram harness layout
Date Posted: July 07, 2002 at 10:58 PM

i need to find a wiring diagram of the harness on a honda radio model number 39100-seo-a220-m2. 89 honda accord i think



Replies:

Posted By: Velocity Motors
Date Posted: July 07, 2002 at 11:05 PM

https://www.the12volt.com/installbay/detail.asp?info=alarm&year=1986-89&make=Honda&model=Accord&ID=17954&type=Stereo

If you need anything else, just post posted_image



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: wolfpreist
Date Posted: July 07, 2002 at 11:16 PM
that helps but what i realy need is a pic of the harness telling where all that goes, what i am trying to do is stick the radio in a 86 olds and i have the diagram for the old radio and i need to see what wire goes where from the old harness to the new radio. 




Posted By: Velocity Motors
Date Posted: July 07, 2002 at 11:47 PM

Do you not have the harness that plugs into the back of the radio on the Honda ? Here's a picture of the harness from the front view :



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: wolfpreist
Date Posted: July 07, 2002 at 11:56 PM

thanks but i had just found one at https://integra.cyberglobe.net/caraudio/diagrams/wiring/

it would be my luck i spend hours looking for this and just when i find it someone tells me where to find it.





Posted By: GlassWolf
Date Posted: July 08, 2002 at 3:13 PM
hint:

go to a junk yard. have tehm cut the car-side harnesses out of an old Honda for you.
use those as a wiring harness metra-style for the Olds.
then just wire the junkyard harness to a GM metra harness and plug it in. consider it a makeshift adapter :)


-------------
-GlassWolf
Pioneer Stage-4, Orion, DynAudio, Fi





Print Page | Close Window