Print Page | Close Window

Kenwood and 2 ohm stereo Stablility

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=17761
Printed Date: May 19, 2024 at 4:19 PM


Topic: Kenwood and 2 ohm stereo Stablility

Posted By: mark241
Subject: Kenwood and 2 ohm stereo Stablility
Date Posted: August 18, 2003 at 11:49 AM

HAs anyone had any problems with kenwood amplifiers running at 2 ohm stereo (ex. kac 7201). If so what happened?



Replies:

Posted By: esmith69
Date Posted: August 18, 2003 at 7:35 PM
Nope all of these amps are two ohm STEREO stable.  In fact, most class AB 2 and 4-channel amplifiers are 2-ohm stereo stable.  Now 2-ohm mono is another story, and no I would not run that amp on a 2-ohm mono/bridged load.

-------------
Ethan
-----
"Patience, persistence, and perspiration make an unbeatable combination for success"
Donate to the12volt.com


Print Page | Close Window