ppi art series 300.2

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=18122
Printed Date: July 15, 2025 at 1:21 AM

Topic: ppi art series 300.2

Posted By: corrin50
Subject: ppi art series 300.2
Date Posted: August 26, 2003 at 6:34 PM

need to know wiring diagram and how to bridge and also ohm it could handle

Replies:

Posted By: mj239air
Date Posted: August 26, 2003 at 10:08 PM

should be the same as all PPI amps. you would use left (+) and right (-) . As far as the ohms I believe that amp was stable to just 2 ohms stereo, and 4 ohms bridged mono. Good luck

Print Page | Close Window