explorer hook up

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=18278
Printed Date: July 23, 2025 at 5:40 PM

Topic: explorer hook up

Posted By: unclealp
Subject: explorer hook up
Date Posted: August 30, 2003 at 5:50 PM

Im trying to hook up my alpine head unit to my ford explorer, 99, but the wire block things doing fit in it!?, theres only one slot for something to go in the head unit, so i bought wire harness, and theres a block with a bunch of wires..How do I hook this up?

Replies:

Posted By: SigiDeba
Date Posted: August 30, 2003 at 6:09 PM

depending on the compatibility of the harness (it might not be right), you can hack up the harness and solder the cables to the right places using diagrams and cable markers. I suggest shrink tubing the soldered joints as well, just remember to put the shrink tubing on first.

-------------
-Sigi Deba

Posted By: unclealp
Date Posted: August 30, 2003 at 6:13 PM

i have no clue what you just said,. where do i hook up all these loose wires at from the 'harness' i bought at the store.

Posted By: GavinJuice
Date Posted: August 30, 2003 at 8:06 PM

unclealp your going to have to tell us more information about your car. Do you have a 2 or 4 door car, does it have a MACH audio system, does it have a Premium sound system or does it have neither? Then we can tell you if you purchased the right wiring harness and how to install your alpine stereo.

-------------
ROCK AND ROLL!!

Print Page | Close Window