’02 tahoe remote tape deck "hole"

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=18379
Printed Date: July 20, 2025 at 7:13 AM

Topic: ’02 tahoe remote tape deck "hole"

Posted By: sjmenn
Subject: ’02 tahoe remote tape deck "hole"
Date Posted: September 02, 2003 at 10:00 AM

Kind of a weird question. I replaced the factory deck in my '02 tahoe. I also pulled out the remote tape deck (since it won't function without the factory head unit). Does anyone have any suggestions or ideas on what to use to cover the hole left by the tape deck??? I suppose I could leave the tape deck in but in my opinion it would be kind of stupid since it's inoperable (I never even used it when it was hooked up). Don't want to just leave the hole there. Thanks in advance.

Steve

Replies:

Posted By: Velocity Motors
Date Posted: September 02, 2003 at 10:16 AM

Get a piece of ABS platics and cut to the proper size & shape. Use double sided tape to attach to the dash.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: sjmenn
Date Posted: September 02, 2003 at 4:28 PM

Thanks for the suggestion, but I was hoping to be a little more creative than that.

Posted By: BumpinBlazer1
Date Posted: September 03, 2003 at 10:24 AM

In my blazer, I cut out a piece of ABS and routered out holes for PS2 controllers. I used extension cables to get from the PS2 under the seat to the dash. I've also seen voltmeters and XM controllers mounted there.

Posted By: sjmenn
Date Posted: September 03, 2003 at 3:59 PM

I actually had my XM controller in there when I still had the factory deck. Now that I have the new Pioneer head unit I don't need the controller, thus I need to do something with the hole.

Print Page | Close Window