Where to run power cable

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=19264
Printed Date: July 12, 2025 at 4:22 AM

Topic: Where to run power cable

Posted By: hammondc
Subject: Where to run power cable
Date Posted: September 24, 2003 at 2:29 PM

2000 honda accord 2 door---

Where is a good place in the firewall to run 4 gauge power cable from battery? I cannot find a good place. I am not new to car audio, this just has me stumped. Looking for ideas. Pics would be awesome if you have a similar set-up/

thnx---C

Replies:

Posted By: Thugstyle
Date Posted: September 24, 2003 at 5:11 PM

above the brake pedal is usually where i install them (I work at circuit city) usually you will find a gromet there if not drill a new hole but be careful where your drilling

Posted By: kenmci
Date Posted: September 24, 2003 at 6:42 PM

which side of the car is the battery on and do you have a manual transmission. If you can't find a place then if you have an automatic then you should be able to drill where the clutch would be if you had one. Again make sure that there is nothing behind where you are drilling. This would work only if you have the battery on the drivers side, since you don't want to cross the engine with the power wire.

Posted By: hammondc
Date Posted: September 24, 2003 at 7:58 PM

it is automatic. and the battery is on driver side. I just don't know where above the pedal to drill. can you give me an idea??

Print Page | Close Window