I need to get around a Mach1000
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=19519
Printed Date: August 22, 2025 at 3:35 AM
Topic: I need to get around a Mach1000
Posted By: T.Hill
Subject: I need to get around a Mach1000
Date Posted: September 30, 2003 at 7:26 PM
My friend has a 2003 GT Mustang with the Mach1000 audio system. He likes the overall sound it has except he wants to add some low end bass. My question is where do I get the signal for the sub amp? If I tapped into the rear speaker leads with a LOC, wouldn't the signal still get managed by the Mach system's electronics? When I had a mustang with a Mach 360 in it, it would keep adjusting the bass or lowering the output to where you could turn it up full blast and it wouldn't blow anything. He wants to be able to turn the stock system up and down like normal and he will use the remote bass control from the Kicker 1200.1 to adjust the bass level to his preference. Any help would be great...
-------------
Pioneer DEH-P980BT, Zapco DCREF1000.4,Pioneer TS-C520PRS, Adire Extremis, MTX TA91002, TC Sounds TC-3000 15"
Replies:
Posted By: Sweekster
Date Posted: September 30, 2003 at 8:43 PM
You would actually add the LOC at the output end of the factory amp. But you would need a loc that is designed to step down an amplified signal. ------------- Duane...
If you think you're confused, imagine how you feel. 
Posted By: T.Hill
Date Posted: September 30, 2003 at 8:46 PM
Any idea on where to get a LOC like that?
-------------
Pioneer DEH-P980BT, Zapco DCREF1000.4,Pioneer TS-C520PRS, Adire Extremis, MTX TA91002, TC Sounds TC-3000 15"
Posted By: Sweekster
Date Posted: September 30, 2003 at 8:53 PM
https://peripheralelectronics.com/2002/loc.asp#premium ------------- Duane...
If you think you're confused, imagine how you feel.
Posted By: wvsquirrel
Date Posted: October 01, 2003 at 7:40 AM
Here's a Link on how to bypass the Mach460. It should be basically the same for the Mach1000. ------------- Squirrel
"No more Cpt. Kirk chit chat"
If its too loud, then you're too old
Donate to the12volt.com
Posted By: T.Hill
Date Posted: October 01, 2003 at 9:21 AM
Thanks guys, all of that is a big help. time to go to work...
-------------
Pioneer DEH-P980BT, Zapco DCREF1000.4,Pioneer TS-C520PRS, Adire Extremis, MTX TA91002, TC Sounds TC-3000 15"
|