Print Page | Close Window

Mercedes 300SDL

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=19805
Printed Date: May 19, 2025 at 5:14 AM


Topic: Mercedes 300SDL

Posted By: lbikrskatr
Subject: Mercedes 300SDL
Date Posted: October 08, 2003 at 12:09 AM

I am trying to remove the factory stereo on a 1987 Mercedes 300 SDL, but after I removed the clips in the front, it only pulled out another 1/2 inch. I would like to know how to remove the entire thing so I can install my old deck.

Any assistance would be helpful



-------------
Lounis Zenad



Replies:

Posted By: w124
Date Posted: October 08, 2003 at 5:26 AM
It's been a whiles since I've done this... but try:

1. Pull up the wood trim around the shifter. Pull up from the rear and disconnect the switches

2. The plastic storage "bin" in front of the shifter should just pull right up

3. Open the ashtray and remove two screws inside it. Remove ashtray.

4. The stereo should now slide out very easily.




Posted By: lbikrskatr
Date Posted: October 08, 2003 at 3:42 PM

thanks, that saved me a lot of time, I was about to start grinding the factory stereo and make it work.



-------------
Lounis Zenad





Print Page | Close Window