kenwood stereos

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=19868
Printed Date: May 11, 2025 at 3:33 PM

Topic: kenwood stereos

Posted By: john kinnon
Subject: kenwood stereos
Date Posted: October 09, 2003 at 12:11 PM

I have an older model 10 disc changer (kenwood) and a new kenwood cd receiver(kdc-722) that i want to install in my vehicle (1999 ford expedition).Is this possible, or will i need some kind of harness adapter.

Replies:

Posted By: DYohn
Date Posted: October 09, 2003 at 11:21 PM

You'll definately want to get a wiring harness like the Metra 70-1771 and the Metra 99-5804 dash kit. These are the Metra part numbers for your truck, but there are other brands that are just as good (like Scosche.) The total cost of the two Metra parts is $30 to $35, and well worth it. You can buy them almost any where car stereo parts are sold.

Best of luck!

Posted By: 67sat
Date Posted: October 11, 2003 at 8:37 AM

Kenwood did change their changer protocol this year. The deck may not be able to communicate with the older changer.

Print Page | Close Window