Print Page | Close Window

couple last minute questions b4 install

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=20026
Printed Date: August 27, 2025 at 12:11 PM


Topic: couple last minute questions b4 install

Posted By: dakoreanjangsta
Subject: couple last minute questions b4 install
Date Posted: October 13, 2003 at 3:26 AM

im installing  an amp and sub into my friends car with a stock head unit.  how is the wiring supposed to go for the low output converter or high low converter or wutever its called?  do i just splice it into the rear speaker wires?




Replies:

Posted By: dakoreanjangsta
Date Posted: October 13, 2003 at 3:33 AM

for the remote turn on wire, is there anything bad with hooking it up to like the cigarette lighter wire, or is it better to connect it to the ignition wire? 

thanks for ur help, and sorry for posting twice




Posted By: Ketel22
Date Posted: October 13, 2003 at 4:08 AM
the loc should just splice into the rear channels. the remote wire can be spliced into any 12v+ that you have in the car except for some you may need to add in a toggle switch of a switch of some kind

-------------
Quad L Handyman services



Posted By: intensem1rider
Date Posted: October 13, 2003 at 12:14 PM
connect the remote wire into a 12 v ignition source, but you may need to get a device that stops the pop when you turn it on, like the one stinger sells.
https://www.darvex.com/miva/merchant.mv?Screen=PROD&Store_Code=D&Product_Code=SPSOFF&Category_Code=EC


Print Page | Close Window