What size fuse for remote lead

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=20079
Printed Date: September 07, 2025 at 3:15 PM

Topic: What size fuse for remote lead

Posted By: wlg83
Subject: What size fuse for remote lead
Date Posted: October 14, 2003 at 10:02 AM

I am running a configuration of multiple amps and a sub crossover. I purchased a 4 fuse block from AutoZone and am using a relay to power the remote turn-on leads. What size fuse would be efficient and safe for these leads. Just want to protect what I have in the car. Thanks in advance for any help reguarding this topic. I cannot say enough good things about the site.

Replies:

Posted By: bberman1
Date Posted: October 14, 2003 at 10:33 AM

A remote wire is very low current. If all your running off of the relay is the remote leads then you can use a 1 or 2 amp fuse.

Print Page | Close Window