Sebring Ignition WIre

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=2026
Printed Date: September 19, 2025 at 4:39 AM

Topic: Sebring Ignition WIre

Posted By: toucansma
Subject: Sebring Ignition WIre
Date Posted: July 17, 2002 at 6:03 PM

I have a 96 Chrysler Sebring (that used to have the infinity system) and I installed new speakers, amp, headunit. Now the ignition wire won't work for the headunit. I tested it with a multimeter. It should be RED / white wire, but nothing works. Any thoughts?

Replies:

Posted By: GlassWolf
Date Posted: July 17, 2002 at 8:39 PM

1995-96 Chrysler Sebring Stereo Information

Constant 12V+
Red

Switched 12V+
Blue

Ground
BLACK / YELLOW

Illumination
n/a

Dimmer
GREEN/ YELLOW

Antenna
Left Rear

Front Speakers
6 1/2" Doors

Left Front (+)
WHITE/ Blue

Left Front (-)
BLACK/ Blue

Right Front (+)
WHITE/ Red

Right Front (-)
BLACK/ Red

Rear Speakers
6" x 9" Rear Deck

Left Rear (+)
Yellow/Blue

Left Rear (-)
Gray/Blue

Right Rear (+)
Yellow/Red

Right Rear (-)
Gray/Red

I suggest using a wiring harness so you needn't cut any wires. These are a saviour as well when selling the car if you keep the system.
your RED / wht is a speaker lead. blue is ignition/switched

-------------
-GlassWolf
Pioneer Stage-4, Orion, DynAudio, Fi

Posted By: toucansma
Date Posted: July 17, 2002 at 9:30 PM

Thanks for in the info, but my Sebring is different. That is for the normal wires, I have that stupid infinity system. Also I know that since I have no solid red nor blue cable(i looked up on other sites for the diagrams). I have tested the wires with a multimeter and only verifed the constant 12v(pink and white). Thats why I was wondering how I can fix the ignition wire. All the help is very appreciated.

Posted By: toucansma
Date Posted: July 18, 2002 at 8:40 AM

Anyone have any ideas??? Thanks

Posted By: Velocity Motors
Date Posted: July 18, 2002 at 9:27 AM

Take the switched ignition from the steering column ( BLACK/ WHITE ) and run a wire from the HU to this wire.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA