6speaker setup changed radio

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=20465
Printed Date: May 14, 2025 at 4:44 AM

Topic: 6speaker setup changed radio

Posted By: razio
Subject: 6speaker setup changed radio
Date Posted: October 23, 2003 at 8:20 AM

which wires connect the rear door speakers when swaping to aftermarket radio with four speaker setup?

Replies:

Posted By: bberman1
Date Posted: October 23, 2003 at 9:20 AM

Here is a diagram https://www.the12volt.com/request/request2.asp of what each wire on your aftermarket radio dose. If you need to know what the wire colors are on your cars end are, we need the year, make, and model

Posted By: razio
Date Posted: October 23, 2003 at 11:21 AM

yeah i need to know the truks wiring because the speakers on the rear door arent working the ones in the back are. the truck is a 98 tahoe LT

Posted By: bberman1
Date Posted: October 23, 2003 at 4:08 PM

https://www.the12volt.com/installbay/detail.asp?info=alarm&year=1998&make=Chevrolet&model=Tahoe&ID=17476&type=Stereo

Posted By: razio
Date Posted: October 24, 2003 at 6:53 AM

the truck originally had 6 speakers the front doors the back doors and the back of the truck when the factory radio was swaped the speakers on the back doors dont connect to anything

Posted By: Metra Tech
Date Posted: October 24, 2003 at 7:25 AM

If you have a nine pin harness along with the standard harness, you will find a green wire with a white stripe. That should be your amp turn on wire. Test it by applying power to it with a small fuse while playing the radio. They should come on for you.

Print Page | Close Window