2003 Honda Accord Ex

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=21128
Printed Date: July 09, 2025 at 7:34 PM

Topic: 2003 Honda Accord Ex

Posted By: qball626
Subject: 2003 Honda Accord Ex
Date Posted: November 07, 2003 at 1:41 PM

Does anyone know how to take out the stock headunit?Is it all clips or does it have screws?

Replies:

Posted By: DYohn
Date Posted: November 08, 2003 at 10:01 AM

Hondas have screws holding the HU in and they are sometimes hard to see. On this year I believe there are three or four hidden screws on the trim bezel and then four screws holding the HU in place that can be seen from the front.

Posted By: jeepinjason
Date Posted: November 08, 2003 at 4:44 PM

I have a similar problem with my 2001 honda civic lx. posted_image I found the screws that hold it in from the bottom of the head unit, but I cannot get the head unit to come out of the dash. Does it have any other screws that I cannot find or is it just clipped into the dash and hard to remove. I just do not want to tear the dash up trying to get it out. Any help is appreciated.

Thanks

-------------
Jason posted_image

2001 Jeep Wrangler TJ
2001 Honda Civic LX Coupe

Posted By: Velocity Motors
Date Posted: November 08, 2003 at 4:49 PM

2001 Honda Civic removal

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: jeepinjason
Date Posted: November 08, 2003 at 5:00 PM

Thanks, man. I'll try it out. I was trying to remove just the radio, I didn't know the whole dash had to be removed. But anyway, thanks a lot!

-------------
Jason posted_image

2001 Jeep Wrangler TJ
2001 Honda Civic LX Coupe

Posted By: dusted340
Date Posted: November 11, 2003 at 10:02 AM

Its not to hard to remove.First the a/c vents have to be removed, the dash piece as well > I just pulled it with a hook inside the vent.Behind it you will find the 3 top screws.You will also need to remove the shifter trim, ashtray,+stroage bin.Then dierctly above the strorage bin is 2 screws .After that gently pull.

Good luck, let me know if you need more detail

Print Page | Close Window