Print Page | Close Window

setup recommendations

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=21517
Printed Date: November 04, 2025 at 3:17 PM


Topic: setup recommendations

Posted By: Muss
Subject: setup recommendations
Date Posted: November 15, 2003 at 5:16 PM

Ok, I have a 600W 4 channel amp, a 222W 2 channel amp, a 12 inch sub, a 10 inch sub, 180W 6x9's, 160W soon to be 200W splits and a 50W x 4 head unit. I'm just wondering what would be the best way to set it up especially in relation to the amps and what to use the channels for. Any help would be appreciated.



Replies:

Posted By: forbidden
Date Posted: November 15, 2003 at 5:45 PM

First off, post up the brand and model#'s so we can find out the real power ratings of your equipment and what the equipment was designed to do or not to do. What vehicle is this going into? I would eliminate one of your subs, generally it's not a good idea to mix driver sizes. Sell one cheap to a friend and buy another sub to match what you already have.



-------------
Top Secret, I can tell you but then my wife will kill me.


Print Page | Close Window