Car Stero Connections

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=2155
Printed Date: June 11, 2024 at 3:04 AM

Topic: Car Stero Connections

Posted By: GhostZero
Subject: Car Stero Connections
Date Posted: July 23, 2002 at 8:56 AM

Ok I have three wires from a CD Changer that i need to install and don't know where they go or how to connect them. I have a '93 Honda Accord SE. Two of the wires are DC in and have fuses on them. The connectors at the end are metal crimps with a rubber sleeve over them. This mean that another wire is supposed to go in them and be crimped into place, but i don't think i am supposed to star splicing wires in my car, does anyone have suggestions? There is a yellow wire labled "Constant 12V supply" and a red one labled "accessory terminal of fuse block". The third wire is thich and black and has a connector on the end which maybe a pin connector would go into. This wire is labled "car antenna". Any Ideas anyone???

-------------
~ Ghost Zero ~

Replies:

Posted By: Samantha
Date Posted: July 24, 2002 at 7:06 AM

Is the cd stacker a fm modulated one?

-------------
Sam

Posted By: Big Dog
Date Posted: July 24, 2002 at 12:24 PM

Hey GhostZero,

Sounds like you have FM modulated player. Is there a DIN connector (½ inch round with 7 or 8 pins) or RCA's? No? Then it's FM modulated. Do you have a modulator (metal box with antenna in and out and power and ground connectors)? No? Then you have a 10 pound paper weight! Anybody wanna buy a changer?!? posted_image

-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.