Print Page | Close Window

RCA Input on stock Fords

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=22474
Printed Date: May 06, 2025 at 10:37 AM


Topic: RCA Input on stock Fords

Posted By: EluminusCivic
Subject: RCA Input on stock Fords
Date Posted: December 07, 2003 at 7:59 AM

Wasup people, got some questions. I'm doing some installs for a couple people and just by chance, they're both Ford. A 2000 Ford Ranger XLT Extended Cab and a 2001 Ford Focus Sedan.

Ok, so I'm doing the install. Wire here, pass it through there, splice this, screw that, everything is going just fine. I like to spend a lot more time on hiding everything to make it a nice clean install, so I usually spend about twice as much time on the install. I got a problem though, both these people still have the stock unit. Here's my question:

Can I somehow hookup the proper RCA cabling for the amp to a stock head unit?



-------------
Someone else did it before you, so learn. Nothing is impossible. - My dad.



Replies:

Posted By: callmeraven
Date Posted: December 07, 2003 at 8:56 AM
The stock radio probably won't have RCA jacks so you'll need to use a line output converter. Best Buy or stores like it should stock them for about $14.99 or so.




Print Page | Close Window