Woofer enclosures

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=22978
Printed Date: May 18, 2025 at 10:59 AM

Topic: Woofer enclosures

Posted By: Geeque
Subject: Woofer enclosures
Date Posted: December 17, 2003 at 12:32 PM

Does anyone know of a free source of software for cut sheets and specs for woofer enclosures, a friend was wondering if there was a such thing. I do it the old fasioned way.

-------------
Gary Kline
MECP Master Technician

Replies:

Posted By: bberman1
Date Posted: December 17, 2003 at 12:50 PM

Here are a few online resources,
https://www.linearteam.dk/default.aspx?pageid=winisdpro
https://www.eatel.net/~amptech/syndicate/spboxnew2syndicate.htm
Port calculator https://www.mhsoft.nl/PortLength.asp

Posted By: Geeque
Date Posted: December 17, 2003 at 1:15 PM

Thanks alot man, appreciate it.

-------------
Gary Kline
MECP Master Technician

Posted By: bberman1
Date Posted: December 17, 2003 at 1:31 PM

Your welcome, If you want to do it the old fashion way (the way I do it) you can use the 12volts volume calculator https://www.the12volt.com/caraudio/boxcalcs.asp#rec

Posted By: Geeque
Date Posted: December 17, 2003 at 1:36 PM

Its for a freind, I use the lengthx widthx heigth and devide by 1728 add in displacements and prego!

-------------
Gary Kline
MECP Master Technician

Posted By: bberman1
Date Posted: December 17, 2003 at 1:41 PM

Print Page | Close Window