Print Page | Close Window

Firewall hole in 4runner

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=23198
Printed Date: May 09, 2025 at 11:01 AM


Topic: Firewall hole in 4runner

Posted By: pureRF
Subject: Firewall hole in 4runner
Date Posted: December 22, 2003 at 12:26 PM

Im installing my system today and tomorrow. Where should i look for a hole in a 2000 toyota 4runner?
thanks

-------------
dream it, build it, fiberglass it



Replies:

Posted By: Alpine Guy
Date Posted: December 22, 2003 at 1:33 PM

up about 4" and about 4" to the left of where the brake pedal goes through the fire wall....if the better is on the drivers side,,,but i don't think it is,,,,so go through the passengers side fire wall, there may be a boot from the wires comming through for all the control moduels.  But im assuming your running 4 Guage for that mrd-m500, i would drill a hole specifically for it, and put a grommit in to protect the wire from getting cut.

Run your rca cables on the opposite side of the truck as the power wire.  I have seen a led get lit up just from radiating power from the power wire.


Print Page | Close Window