Kicker Comps

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=23231
Printed Date: May 11, 2024 at 9:45 AM

Topic: Kicker Comps

Posted By: MAXMOUSE1983
Subject: Kicker Comps
Date Posted: December 22, 2003 at 9:09 PM

hey yall i have 2 kickers comps 12s 4 ohm stable i wanna the best way i can hook it up.

i have a baja amp that is 400 amps
stable at 2 omhs what sould i do or get a better amp

Replies:

Posted By: bberman1
Date Posted: December 22, 2003 at 10:40 PM

Are they the 4 ohm model or the 8 ohm?

Posted By: MAXMOUSE1983
Date Posted: December 25, 2003 at 7:13 PM

hey im sorry they are 8ohms]

Posted By: bfog99
Date Posted: December 25, 2003 at 7:25 PM

personally i would look into another amp. i am not the biggest fan of baja. since they are 8 ohm speakers, you can wire then into 4 ohm mono load. according to what i found, they are 150 watts rms each, so 300 total at a 4 ohm load. i would look into the jbl bp600.1 it will put out 300 watts rms at 4 ohms. this one one amp from many that would work. if you want to work with what you have, it would depend on the amp. how many channels, watts per channel, ohms stability per channel. if it is a 2 channel bridge the amp to run the two subs at 4 ohms. if it one channel wire them the same way to the one channel. make sense?

Posted By: MAXMOUSE1983
Date Posted: December 25, 2003 at 7:34 PM

hey thankx for that i have two channels LF & Rt
i have them right now bridge out. I only use it for that one purpose for lows do u think a american pro could handle it it is 600 watts 4 channel highs and lows

thankx