01 Galant head unit install
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=24380
Printed Date: June 02, 2024 at 9:33 AM
Topic: 01 Galant head unit install
Posted By: 0Galant1
Subject: 01 Galant head unit install
Date Posted: January 11, 2004 at 4:28 PM
I am attempting to install my custom head unit into my 01 Galant, but I can't get the stock one out. I've gotten the wood grain bezel off, but I can't actually pull the stock head unit out. Can someone help please?? Thanks!
Replies:
Posted By: danxav13
Date Posted: January 16, 2004 at 10:50 PM
Look for some screws. I can't exactly remember where they all are but most if not all import radios don't just pull out. Try looking up under the radio, or sides. It's a mitsu, they are not too hard.
Posted By: RufNUSD
Date Posted: January 17, 2004 at 10:03 PM
The easiest thing to do is drop the AC controls. Once this is done their is a screw far back on the left side. For cosmetics I recommend front loading this radio.
-------------
Someone pass me that bottle.
Posted By: auex
Date Posted: January 17, 2004 at 10:14 PM
There should be a screw in the rear of the radio, I think it is on the right, but like RufNUSD said you will probably have to drop the ac controls to get to it. Then just lift the radio up a little bit to get the tabs on the side out of the plastic and it should come right out.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
|