Print Page | Close Window

amp question

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=24526
Printed Date: June 06, 2024 at 1:30 PM


Topic: amp question

Posted By: Xtremesize1978
Subject: amp question
Date Posted: January 13, 2004 at 5:36 PM

I've got an amp. that the power light is blinking and the subs are pulseing noise. Why is this happening



Replies:

Posted By: lspker
Date Posted: January 13, 2004 at 8:41 PM

Sounds like you may have blowen your amp.  Check your power and ground, make sure you have 12+v at the amp.  Check that the trig wire is working.  Dissconnect the subs, if amp turns on,  if amp turns on you may have a cooked sub, or too low impedence for the amp.

 




Posted By: superstreet786
Date Posted: March 14, 2004 at 9:05 PM
I think your power supply is bad

-------------
---- 1996 Chevy S10 ----
1 Lightning Audio S2.600.2 Amp
2 Lightning Audio 12" Subs
1 Lightning Audio 1 Farad Cap


Print Page | Close Window