Print Page | Close Window

rockford series 1

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=24757
Printed Date: May 09, 2025 at 3:47 PM


Topic: rockford series 1

Posted By: Gilateen
Subject: rockford series 1
Date Posted: January 17, 2004 at 12:55 PM

hey can anyone tell me if my series 1 12" rockford sub is dual or single voice cone? it has two + - connections on the back.

the number on the back of it is s1-412, i got it from a friend who had it laying arond in the basement. help is needed, please!




Replies:

Posted By: forbidden
Date Posted: January 17, 2004 at 1:42 PM
According to Rockfords website and the model # that you provided it is a single 4 ohm voice coil. I imagine that as you see two + and 2 - terminals you assume it was a dvc, these terminals are probably wired together in parallel , this allows you to hook more subs together in an easy fashion.

-------------
Top Secret, I can tell you but then my wife will kill me.



Posted By: Gilateen
Date Posted: January 17, 2004 at 2:06 PM

thanks, i been wondering for a while about that.

thanks again.




Posted By: MAXST
Date Posted: January 17, 2004 at 3:37 PM
i have a pair of them, but single voice coil.  i contacted rockford and they can no other info on them other than the name, what ohm the voice coil was, and how many rms it can handle...which is 150.

-------------
I need quality equipment, feel free to donate.


Print Page | Close Window