radio wiring 1999 Ranger

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=25468
Printed Date: July 07, 2025 at 5:11 PM

Topic: radio wiring 1999 Ranger

Posted By: scochran2
Subject: radio wiring 1999 Ranger
Date Posted: January 28, 2004 at 11:07 PM

I need the radio wiring diagram for a 1999 Ranger. I have a 1998 - 2000 Explorer AM/FM CD I want to install. Plugs don't match? Need pin out for truck and radio!

Replies:

Posted By: Teamrf
Date Posted: January 29, 2004 at 3:30 PM

If you are doing a hard wire in that car your best bet is to get a tone generator, and a DMM. Don't use a test light. Anyway, find all of your connections and solder and tape.

-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.

Posted By: customsuburb
Date Posted: January 29, 2004 at 7:13 PM

I wouldnt use tape behind a dash because it can fall off because off the heat in the summer and cause a short. Use crimp on bullets to connect wires togethor like when you crimp the radios wiring harness to the vehicles or to an extra one you bought.

Posted By: geepherder
Date Posted: January 29, 2004 at 11:23 PM

For a pinout, see if this helps: https://www.installdr.com/Harnesses/Ford-Wiring.pdf. Tape'll be fine as long as you use the quality 3M stuff (Super 33+). I can't believe how cheap guys said this was (90 cents a roll at the HD?). Here down south, it's around $3.

-------------
My ex once told me I have a perfect face for radio.

Print Page | Close Window